Wavin has introduced a series of handy hack videos demonstrating how to save time on tricky jobs.
From pipes that you can’t quite reach, to bends that won’t fit into tight corners – many plumbers will have been there, scratching heads wondering how to tackle an awkward job. To help, Wavin has launched a new series of handy hack videos, giving plumbers a step-by-step guide on how to use its range of products. These videos are designed to help plumbers develop their skills, get jobs done quicker and make tricky jobs a lot easier to handle.
The series is presented by former plumber Steve Harris, who’s now a technical support engineer at Wavin. The videos cover both Wavin Hep2O and Osma products.
Hack 6: Using adaptors with the Flexible Waste connector
To make your life easier, you can use lots of different adaptors (including both push-fit and solvent weld options) with the three metre Flexible Waste pipe. These can be glued onto the ends, but before doing so, make sure you clean both the exterior of the adaptor and the interior of the pipe with a solvent cleaner. Once you apply the glue, it will dry in five minutes but it’s best to wait at least 24 hours before letting any water run through the pipe.
Watch the previous hacks in the series here
