Here, and in no particular order, PHPI takes a brief look at a few of the companies exhibiting at the event, which takes place at the NEC, Birmingham from 23rd-25th June, and what visitors can expect to see on their stands. (Stand numbers correct at time of going to press.)
Salamander Pumps (Stand 4K12)
At InstallerSHOW 2026, Salamander Pumps will showcase its range of water boosting solutions, with live demonstrations and expert insights, as well as offering free giveaways to the installer community, on stand 4K12.
Visitors to the stand will get the chance to see a variety of the company’s products live in action and speak with the Salamander Pumps team to learn more about each solution. Products on display include TankBoost, an all-in-one unit made up of a 100L, 200L, 350L or 450L water storage tank and integrated submerged pump designed to increase both the pressure and flow in a mains-fed system up to 3.0 bar and 80L/min, or up to 5.0 bar and 120 L/min, AquaScan a four-in-one digital multimeter that delivers live, measurements for water flow, pressure, temperature and hardness (via Total Dissolved Solids) and HomeBoost, an intelligent mains booster pump which recognises low water flow and boosts the incoming mains supply either directly or indirectly via the combi boiler up to 12L/min. A further solution, TapBoost has been designed to increase the flow rate up to 7-11L/min depending on the incoming flow.
Mitsubishi Electric (Stand 5C40)
Mitsubishi Electric will be exhibiting its latest heat pump technology at the InstallerSHOW this year, with the Ecodan R290 monobloc heat pump. On the stand visitors will be able to see how the technology can help to transform home heating and speak with Mitsubishi Electric’s team about design considerations, installation support and advanced training.
The Ecodan R290 is available in 5kW, 6kW, 8.5kW, 10kW and 12kW models, uses R290 refrigerant and has a low global warming potential (GWP) of just 0.02. It is designed to operate at ambient temperatures down to -25°C and can deliver water temperatures of up to 75°C.
Mitsubishi Electric is also taking part in the ‘Celebrating Women in Industry’ panel and networking session at the InstallerPLAZA on the 23rd June from 4-5pm BST. The session will bring together voices from the heating, ventilating, cooling and construction sectors to discuss both the challenges and opportunities for women working in these industries.
NIBE (Stand 5F54)
NIBE will be celebrating 20 years in the UK at InstallerSHOW 2026. Taking centre stage will be the latest additions to the NIBE heat pump range, including the company’s new R290 ground and air source heat pump ranges.
Alongside the product showcase, NIBE will also be highlighting the next phase of its NIBE Pro installer offering. The company says the scheme is being expanded to support more installers as they move into heat pumps, while continuing to focus on best practice, system design and long-term performance.
To mark the anniversary, NIBE will also be inviting visitors to take part in The NIBE 20:20 Challenge – a darts competition running across the show, where installers can test their aim for the chance to win one of 20 S2060 heat pumps.
For those looking to escape the pace of the show floor, the NIBE Pod will offer a more relaxed space to grab a coffee, have a chat with the team and take five before heading back out.
Trianco (Stand 5G71)
Trianco will be exhibiting its range of Activair heat pumps at InstallerSHOW. Among the products on display will be the Activair R290 Outdoor high temperature heat pump, and the Activair R290 Commercial heat pump which, the company says, is suited to commercial premises requiring constant heating and hot water.
In addition, the company will be launching three new products: the Activair R290 Indoor heat pump range comprising a 3.2kw Wall Hung and 5kw floor standing heat pump and the Activair Pro R290 Outdoor heat pumps.
Visitors will also be able to find out about Trianco’s product training, its remote monitoring system and the company’s design and specification service.
Vaillant (Stand 5D42)
Vaillant will once again be exhibiting at InstallerSHOW, offering visitors an exclusive preview of its next generation of heating technology.
With a number of product launches on the cards in 2026, the company says visitors to the stand can be among the first to get up close to its new aroTHERM plus, while also getting a chance to see how this fits with Vaillant’s full system solutions.
In addition to showcasing its latest product launches, Vaillant’s team of technical experts will be present throughout the event, offering guidance on its MCS Partnership support, system design and specification, right through to installation and aftersales support. Vaillant’s team of trainers will also be on hand to talk through the latest training courses and developments heating installers can sign up to.
Glow-worm (Stand 5D45)
Glow-worm has stepped away from the usual exhibition experience and will transform its stand into a classic pub: The Glow-worm Arms. It is asking visitors to pull up a stool, take a well-earned break, and join the company to celebrate Glow-worm’s latest product additions.
The company will also be giving visitors a first look at a new product launch, which it says is set to get everyone talking.
Additionally, together with Vaillant, Glow-worm is a co-sponsor of the InstallerSHOW plaza, which will be home to a full schedule of talks, expert panels, and industry debates.
Schlüter-Systems (Stand 4D27)
Schlüter-Systems will be exhibiting at InstallerSHOW 2026, returning to the NEC Birmingham for the fourth consecutive year. The company is both placing a strong emphasis on its wide product range while also focussing on its services and technical support that underpin its system-based approach.
At the heart of the stand will be DITRA-HEAT, Schlüter-Systems’ electric underfloor heating solution, which brings uncoupling, waterproofing and heat distribution together in a single system. The Peel & Stick variant is designed to make installation more straightforward, helping installers save time and reduce mess.
Visitors will be able to discuss best practice installation, suitability for different substrates and how the system best integrates. Alongside this, Schlüter-Systems will be highlighting its shower solutions and waterproofing systems, demonstrating how a fully integrated approach supports compliant, durable wet areas.
The Schlüter‑Systems team will be available throughout the show to offer practical advice, technical insight and installation guidance.
Talon (Stand 4L10)
Talon Manufacturing is heading to InstallerSHOW promising a stand packed full of practical plumbing solutions, new innovations and a variety of products for installers to explore – along with a few surprises.
Visitors can expect a lively mix of live demos, giveaways and a first-hand look at updates to Talon’s popular PipeSnug range, including the FS5. Also on show will be Talon’s pipe clip range. The Hinged Clip offers a secure 360° fixing with consistent spacing while the EZ Joist Clip is designed to make overhead installs easier and safer when working at height.
As well as showcasing its latest solutions, Talon will also be marking a major milestone, celebrating 40 years of manufacturing. Visitors to the stand can expect a few extras to mark the occasion, along with a hint at something big still to come.
Grant UK (Stand 5C44)
The Grant UK stand will be in its usual location by the Plaza where visitors are promised exciting new products while also enjoying Grant UK’s 30th Anniversary celebrations.
2026 is a milestone year for Grant UK as it marks three decades of the company heating Britain’s homes. With InstallerSHOW 2026 taking place just a month after Grant UK’s official 30th birthday, the company is looking forward to marking this anniversary at the show with this milestone being a central part of the Grant UK stand. Customers, both old and new, are invited to pop by to join in the celebrations.
In addition, visitors to the stand will also be able to enjoy hospitality while speaking to members of the Grant UK Team who will be on hand to talk about the products and services on display. Grant’s comprehensive range of renewable heating products will be available to see alongside some new products. Visitors can also learn about Grant UK’s extensive customer support offering, from Start with Grant through to the G1 Installer Scheme.
RIDGID (Stand 5G37)
Founded in 1923, RIDGID has over a century of experience building professional tools for tough jobsite conditions. At InstallerSHOW the company will showcase a focused selection of compact press tools built for fast and precise pipe connections in domestic and commercial installations.
Also on show will be RIDGID’s drain cleaning tools, built to handle everything from routine maintenance to serious blockages.
On the stand visitors will be able to see live demonstrations, get hands-on with the tools, and talk to product specialists.
Arctic Hayes by DiversiTech UK (Stand 5C14)
Visitors to InstallerSHOW this summer will have the chance to get their hands on a great signed collectible, courtesy of an Arctic Hayes by DiversiTech UK special on-stand giveaway. The promotion will see a framed replica 1966 shirt signed by Geoff Hurst as the standout prize.
“It’s going to be a fabulous summer of sport and we want to celebrate with InstallerSHOW visitors,” says Lee Parsons, UK Business Unit Director. “With so much football to look forward to this summer, the giveaway felt like a natural fit. The signed Geoff Hurst piece is a brilliant and coveted prize and it’s a great reason for visitors to come and see what both Arctic Hayes and DiversiTech UK have to offer.”
Running across the duration of InstallerSHOW, the giveaway is open to all visitors. To take part, visitors simply need to pick up an entry card from the Arctic Hayes stand (5C14). Once there, they can receive their first stamp before heading over to the main DiversiTech UK stand (5F33) to secure a second stamp and complete their entry into the draw.
Completed cards can then be handed in at either stand. The winner will be selected at random on Monday 29th June with the successful entrant contacted shortly afterwards. As with all promotions of this kind, the prize is subject to availability and terms and conditions apply.
Image: Grant UK
