Grant UK has announced it is introducing new models to its Wave cylinder range, with the addition of six cylinders along with a buffer and volumiser.
Grant UK is launching two products which will be compatible with its Wave Cylinder range, including a 50 litre buffer tank and a 30 litre volumiser.
The buffer tank, which allows for different configurations of the flow and return to and from the heat source and system, is said to maintain a constant flow rate from the boiler or heat pump to help to maximise its efficiency. It will also include a 3kW back-up immersion element and ‘dry’ thermostat pocket.
The volumiser has been designed for use when the volume on any zone within a system is below the minimum required for the correct operation of the heat source. The volumiser unit claims to ensure that an inverter type heat pump, for example, can accurately balance the modulation functions of the fan, compressors and circulating pump, reducing the risk of faults and start/stop cycles.
Grant’s High Performance cylinder range will also be welcoming new additions, which will incorporate a buffer tank. Three of these units, available in 200, 250 and 300 litre variants, will combine the cylinder with the 50 litre buffer tank at its base, reducing the need for separate tanks.
A further three pre-plumbed cylinders are also joining the range. These models, which include the 200, 250 and 300 litre cylinders with the combined 50 litre buffer tank, are pre-plumbed and will include a domestic hot water zone valve, two space heat zone valves, a wiring centre, dual thermostat, mains water inlet group and tundish. All the cylinders will come complete with a 3kW immersion with an additional back-up immersion element fitted to the buffer.
Grant’s High Performance cylinder range has been designed to complement both oil and renewable heat sources.
