How to... fit a Mira Sport Multi-fit
The new Mira Sport Multi-fit is slated to be able to easily replace 99% of all electric showers through its innovative and flexible approach to water and electrical connections. Christian Wagner, training development manager at Mira, runs through a simple switchover.
Remove and discard old shower.
To adjust for right hand electrics, move terminal block from left to right side. Move retaining screw from right to left side.
To adjust water supply for right hand connection. First unscrew red plug and retain for later. Unscrew filter from left side, screw insert red plug in its place and attach filter on the right.
Rotate inlet connector according to position of pipe work of installation.
Ensure the shower is level, mark and drill fixing holes.
Fit case inserts to suit installation requirements and mount appliance on wall.
Connect water supply pipe and turn on water supply to check for leaks.
Strip back electric cable if required. Tighten all six screws on terminal block.
Fit inserts then fit service tunnel.
Ensure spindles are aligned and fit cover with screws provided.